Advertisement
Assembly
Pad Lower Pocket
9
Seat Bottom Tube
• Fit the pad lower pocket onto the seat bottom tube, as shown.
10
• Insert and "snap" the peg on the toybar into the socket on the
swing arm. Pull the toy bar up to be sure it is secure.
Assembly is now complete.
Hint: We recommend using alkaline batteries for longer battery life.
Note: Low battery power may cause product movement to slow
and sound volume to become faint or turn off all together. If this
should happen, please remove and discard all four batteries and
replace with four, new LR14 ("C") alkaline batteries.
Toy Bar
• Locate the battery compartment door on the frame.
• Loosen the screws in the battery compartment door.
• Remove the battery compartment door.
• Insert four "C" (LR14) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
Batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
Socket
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type as recom-
mended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removeable, rechargeable batteries are used, they are only to
be charged under adult supervision.
5
5
Battery Installation
1,5V x 4
LR14 ("C")
Shown Actual Size
Battery Compartment Door
Battery Safety Information
Advertisement
