Inserting Batteries Into The Remote Control - Sony HT-CT260 Operating Instructions Manual
Hide thumbs
Also See for HT-CT260:
- Limited warranty (1 page) ,
- Operating instructions manual (130 pages) ,
- Operating instructions manual (20 pages)
Advertisement
Available languages
Available languages
HT-CT260/HT-CT260HP - HTCT260_CT260HP__EN_FR_ES.pdf
Inserting batteries into the remote control
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the
batteries to the diagram inside the battery compartment of the remote control. To use
the remote control, point it at the remote control sensor
Bar.
Notes
• Do not leave the remote control in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote control casing, particularly when replacing the
batteries.
• Do not expose the remote control sensor to direct sunlight or lighting apparatus. Doing so may
cause a malfunction.
• If you do not intend to use the remote control for an extended period of time, remove the batteries
to avoid possible damage from battery leakage and corrosion.
11 of 130
at the front of the Sound
11
US
http://www.docs.sony.com/release/HTCT260_CT260HP__EN_FR_...
3/24/13 8:44 PM
Advertisement
Chapters
