GMC 2015 Canyon Owner's Manual page 90

Caution
Do not let the LATCH
attachments rub against the
vehicle s safety belts. This may
damage these parts. If necessary,
move buckled safety belts to
avoid rubbing the LATCH
attachments.
Do not fold the empty rear seat
with a safety belt buckled. This
could damage the safety belt or
the seat. Unbuckle and return the
safety belt to its stowed position,
before folding the seat.
If you need to secure more than one
child restraint in the rear seat, see
Where to Put the Restraint on
page 3-35.
Crew Cab
1. When installing a rear-facing
child restraint, it may be
necessary to move the front seat
forward to properly install per the
child restraint manufacturer
instructions. See Seat
Adjustment on page 3-3 or
Power Seat Adjustment on
page 3-4.
2. For rear outboard seating
positions, if the head restraint
interferes with the proper
installation of the child restraint,
the head restraint may be
removed. See Head Restraint/
Headrest Removal and
Reinstallation at the end of this
section.
Seats and Restraints
3. If the child restraint
manufacturer's instructions
recommend that the top tether
be attached, attach the top
tether to the top tether
anchor (1). Refer to the child
restraint instructions and the
following steps:
3.1. Release and pull the rear
seatback forward to access
the top tether anchors (1).
See Rear Seats (Crew Cab)
on page 3-7.
3.2. Put the child restraint on
the seat.
3-43