GMC 2015 Canyon Owner's Manual page 350

Extended Cab
1. Jack Cover
2. Tool Bag Cover
To access and remove the jack and
tools:
1. Pull the bottom of the jack
cover (1) forward to remove it.
2. Pull the lower access pocket
forward and then upward to
remove the tool bag cover (2).
3. Turn the knob on the jack (1)
counterclockwise to lower the
jack head to release the jack
from its holder.
4. Turn the wing nut (2)
counterclockwise to remove the
jack and wheel blocks.
5. Turn the wing nut (3)
counterclockwise to remove the
tool bag.
Use the jack handle extensions and
the wheel wrench to remove the
underbody-mounted spare tire.
Vehicle Care
1. Spare Tire (Valve Stem
Pointed Down)
2. Tire/Wheel Retainer
3. Hoist Cable
4. Hoist Assembly
5. Hoist Shaft
6. Jack Handle Extensions
7. Wheel Wrench
8. Spare Tire Lock (If Equipped)
9. Hoist Shaft Access Hole
10. Hoist End of Extension Tool
10-65