Do you have a question about the MIRADA and is the answer not in the manual?
Questions and answers
Ron
January 26, 2025
I have a problem with my mirada back bottom corner slide will not pull all in leaves about 2in gap ,how do I get it to pull in
1 comments:
Mr. Anderson
February 10, 2025
To fix the back bottom corner slide on your Coachmen RV Mirada that won't pull in completely, follow these steps based on your slide-out system:
1. Check Battery Voltage – Ensure you have sufficient 12V DC power, as low voltage can affect slide operation. 2. Power Gear Electric Slide-Out (if equipped): - Remove the access panel on the bed base (facing living quarters). - Locate the 3/4” manual override hex collar. - Use a socket and ratchet to manually crank the slide in fully. - Reset the manual override switch to normal operation. 3. HWH Hydraulic Slide-Out (if equipped): - Locate the hydraulic pump below the driver’s cockpit. - Open the valve on the pump. - Manually push the slide room until fully closed. - Close the valve on the pump.
If the slide still does not retract completely, inspect for obstructions, misalignment, or mechanical issues. If needed, contact Coachmen Customer Service for further assistance.
This answer is automatically generated
John Robert Smith
July 21, 2025
Where is the plug in for the microwave on a 2011 Coachmen Mirada ?
Bob
May 4, 2025
How to access backside connections of living area smart tv
Need help?
Do you have a question about the MIRADA and is the answer not in the manual?
Questions and answers
I have a problem with my mirada back bottom corner slide will not pull all in leaves about 2in gap ,how do I get it to pull in
To fix the back bottom corner slide on your Coachmen RV Mirada that won't pull in completely, follow these steps based on your slide-out system:
1. Check Battery Voltage – Ensure you have sufficient 12V DC power, as low voltage can affect slide operation.
2. Power Gear Electric Slide-Out (if equipped):
- Remove the access panel on the bed base (facing living quarters).
- Locate the 3/4” manual override hex collar.
- Use a socket and ratchet to manually crank the slide in fully.
- Reset the manual override switch to normal operation.
3. HWH Hydraulic Slide-Out (if equipped):
- Locate the hydraulic pump below the driver’s cockpit.
- Open the valve on the pump.
- Manually push the slide room until fully closed.
- Close the valve on the pump.
If the slide still does not retract completely, inspect for obstructions, misalignment, or mechanical issues. If needed, contact Coachmen Customer Service for further assistance.
This answer is automatically generated
Where is the plug in for the microwave on a 2011 Coachmen Mirada ?
How to access backside connections of living area smart tv
How to install DVD player