Table of Contents
Advertisement
Using The Desk Charger
For indoor use only. To reduce risk of injury, charge only nickel cad-
mium type rechargable batteries. Other types of batteries may explode
causing personal injury or damage. Replace defective cords immedi-
ately.
1.
Plug in the charger and turn it on using the ON/OFF power switch lo-
cated in the rear.
2.
Turn the radio OFF and place it into the proper charging sleeve with
the speaker facing the front of the charger. If only charging a battery
pack, properly insert the battery pack into the charger as indicated on
the battery pack making sure the ON-OFF switch on the battery pack is
in the OFF position (M-RK, Monogram or Prism HP battery packs do
not have an ON/OFF switch).
3.
STANDARD MULTI-UNIT CHARGER: The CHARGE (red) indica-
tor will light indicating the battery is being charged The proper charge
current for long or short case battery packs is selected by the insert mi-
cro switch. To charge the battery to maximum capacity, let the battery
pack charge for at least 14 hours
4.
RAPID MULTI-UNIT CHARGER: The CHARGE (red) indicator will
light indicating the battery is being charged. (If the CHARGE indicator
is blinking slowly - the charger is in the pre-charging mode. The
charger should switch to normal charge within 10 minutes). When the
READY (green) indicator lights - charging is complete and the charger
is in trickle charge mode.
14
OPERATION
CAUTION
Advertisement
Table of Contents
