Gigabyte GA-6VA7+ User Manual page 67

•
Onboard Serial Port 1
The default value is 3F8/IRQ4.
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
•
Onboard Serial Port 2
The default value is 2F8/IRQ3.
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
•
UART2 Mode Select
(This item allows you to determine which UART2 Mode of onboard I/O
chip), the default value is Normal.
ASKIR Set onboard I/O chip UART2 to ASKIR Mode.
IrDA Set onboard I/O chip UART2 to IrDA Mode.
Normal Set onboard I/O chip UART2 to Normal Mode.
•
UART2 Duplex Mode
The default value is Half.
Half Set UART2 Duplex Mode to Half.
Full Set UART2 Duplex Mode to Full.
BIOS Configuration
4-23