Asus Motherboard P5NT WS Product Manual page 158

5. Align and insert the connector to the goldfingers on each graphics card. Make
sure that the connector is firmly in place.
6. When installing two VGA cards using a 20-pin ATX PSU with sufficient+12v
capability, we recommend that you connect the auxillary power source from
the power supply to the graphics card. Refer to the PSU documentation for
dual VGA power requirements.
7. Connect a VGA cable or a DVI-I cable to the graphics card/s.
We recommend to install an additional chassis fan for better thermal
environment.
6-4
connector
Chapter 6: NVIDIA ® dual graphics technology support