Features - GE WNSE5699 Owner's Manual

About washer features.
STAIN SPRAY
PerfecTemp
6
StainAssist
This option adds a short agitation and a soaking period at the beginning of
the selected wash cycle.
2nd Rinse Option
When you use extra detergent or bleach to clean heavily soiled clothes, you may want
to use the 2nd Rinse option. It provides a second deep cold rinse.
Extended Spin Option
Use this option to extract more water from your clothes. Clothes will be drier when this
option is selected.
Stain Spray
When you open the washer lid and press the STAIN SPRAY button, you will see a short
stream of cold water.
Open the washer lid.
1
Press the STAIN SPRAY button. (You will see a short stream of water.)
2
Dampen your soiled garment with the STAIN SPRAY option and rub your favorite
3
pretreatment product into soiled area.
NOTE: The STAIN SPRAY option will not work if
the washer lid is down
the washer tub is filling
the water has already reached the level you selected.
PerfecTemp
PerfecTemp senses the incoming water temperature and adjusts the fill water to obtain a more
precise temperature range for all three wash temperatures. You may select cold, warm or hot.
For example, in a Cold Wash selection, some warm water may be added to reach a
temperature needed to better dissolve detergents. Often, detergents are not completely
dissolved in very cold water, especially in cooler climates.
NOTE: PerfecTemp will not adjust the fill on WARM WASH unless the washer lid is closed.
Be sure to start the washer after the lid is closed.