Table of Contents
Advertisement
Accessories/Optional Accessory
Check you have all the items shown.
Accessories
Remote Control
Batteries for the Remote
Transmitter
Control Transmitter (2)
N2QAYB000486
AA Battery
Pedestal
TBLX0145 (TC-P50VT25X)
Operating Instructions
Warranty Card (Mexico)
3D Eyewear (p. 22)
RS232C terminal Specifications
Optional Accessory
Wall-hanging bracket
(angle)
TY-WK4P1RW (for 50")
TY-WK6P1RW (for 65")
a: 15.7" (400 mm)
a: 26.9" (684 mm)
b: 11.8" (300 mm)
b: 11.8" (300 mm)
Warning
In order to maintain the TV's performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to
prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the
wall before hanging bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
Installing the remote's batteries
Pull open
Hook
8
Accessories
AC cord
Screwdriver
(for 3D Eyewear)
TBLX0192 (TC-P65VT25X)
How to assemble (p. 9)
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please refer
to the wall-hanging bracket installation manual.
Rear of the TV
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
Depth of screw:
a
minimum 0.59" (15.0 mm) (50"),
b
maximum 1.18" (30.0 mm)
M8
(View from the side)
Holes for wall-hanging
bracket installation
Caution
Close
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types
(such as alkaline and manganese
batteries).
Note the correct
•
Do not use rechargeable (Ni-Cd)
polarity (+ or -).
batteries.
Do not burn or break batteries.
■
Assembling the pedestal
[TC-P50VT25X (TBLX0145)]
Fix securely with assembly screws
(Total 3 screws)
Tighten screws firmly.
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
[TC-P50VT25X]
B
0.55" (14.0 mm) (65")
Pole
[TC-P65VT25X]
B
Pole
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws
Pull out the TV from the pedestal.
Remove the assembly screws
Attaching / Removing the pedestal
[TC-P65VT25X (TBLX0192)]
Fix securely with assembly screws
A
.
(Total 6 screws)
Tighten screws firmly using Allen wrench
A
Pole
Pole
Base
Front
Bottom view
Rear side
Arrow
mark
Hole for pedestal
installation
Pole
Fix securely with assembly
screws
. (Total 4 screws)
B
Base
Bottom view
Rear side
Arrow
mark
Hole for pedestal
installation
Pole
Fix securely with assembly
screws
B
. (Total 4 screws)
Base
from the TV.
B
A
from the pole.
Accessories
.
A
Assembly screws
C
A
A
(for 50")
C
M5 × 18 (Silver) (3)
(for 65")
Pole
M5 × 30 (Silver) (6)
B
Front
(for 50")
M5 × 30 (Black) (4)
Base
(for 65")
M6 × 25 (Black) (4)
Pole (1)
(for 50
"
)
(for 65
"
)
Back
Front
Base (1)
(for 50
)
"
(for 65")
Allen wrench
(included tool only for 65")
C
9
Advertisement
Table of Contents
