Noise And Vibration; Machine Inspection; Machine Components - NSS Enterprises CHAMP 3529 RB Operation Manual

NOISE AND VIBRATION

NOISE
Sound pressure level at Operator
position
VIBRATION
Weighted RMS acceleration
value (ISO 5349)

MACHINE INSPECTION

• Now that the machine is unpacked remember
to recycle all packing materials.
• Inspect the machine for damage or missing
components. If damage is found, contact the
local freight company to file a freight claim.
• Inspect squeegee assembly for concealed
damage.

MACHINE COMPONENTS

CONTROL PANEL
The operator control panel is located to the left
of the operator's seat. This panel has
components that control various machine
functions.
See diagram below.
Key Switch - key must be turned to the right to
activate machine.
Brush Switch - 3 positions, 3 functions:
• Up is on, lowering brushes to light pressure.
• Middle is off, raising brushes.
• Down is on, lowering brushes to heavy
pressure.
• Brushes only come on when machine is
moving in forward or reverse.
70 dB(A)
2
.407 m/s
LCD Display Screen - brightly lit to work in all
lighting situations.
Traction Speed Switch - 3 Positions:
• Down is high speed.
• Center is medium speed.
• Up is low speed.
Push Button - Toggles between display
screens. Defaults to screen 1 when turned on.
Vacuum Switch - 2 positions; 2 functions:
• Up is on, lowering squeegee.
• Down is off, raising squeegee.
• Squeegee automatically rises in reverse.
Brush Speed – 2 positions
• Up rotates the brushes at 220 RPM.
• Down rotates the brushes at 300 RPM.
Emergency Stop Button
• Push for off.
• Turn for on.