PowerLogix PowerForce G4 ‘57 Installation Instructions Manual page 7

Mac OS Installations
Before proceeding to hardware installation, make sure your G4 has the proper version of the OS
installed. (Refer to page 4.)
Installing the CPU Card
Power down the computer. Review the static-safe procedures from Page 4 before proceeding.
Unhook the latch on the side of the case and pull down the cover.
Locate the original processor card in your computer. Pictured above with #1 is the location in an AGP
"Sawtooth" or "Gigabit Ethernet" system. If you have a Power Mac G4 "Digital Audio" or QuickSilver system
your processor card will be located where the #2 is.
PowerLogix PowerForce 7447/7457 Installation Manual Page #7