NeuroSky MindWave Mobile Quick Start Manual

For Windows
Note Do not insert the applications disc yet. You will need to pair the device successfully.
Turn on the headset. Pairing mode should start automatically with the LED quickly flashing blue (2/sec). If it
1
does not, hold the power switch in the "ON" position for 3 seconds until it flashes. It is now in pairing mode.
2

For WINDOWS 10:

Click Settings
Select MindWave and click Pair
For WINDOWS 8 & 8.1:
Click Settings， then Control Panel
It may take several minutes to install
necessary files on your system

For WINDOWS 7:

Click Start, then Control Panel
Click Close to complete pairing

For WINDOWS XP:

Click Start, then Control Panel
Check "My device is setup and
ready to be found"
Click Finish to complete pairing
3 If successful, the Bluetooth software will indicate paired and/or connected and the headset's light
will slowly flash blue .
Once the headset is paired, insert the Application Disc.
4
Open your CD-ROM drive folder and double-click on "Setup.exe" to begin the installation process.
5
Keep your MindWave power on through the installation process.
After installation, the "MindWave Mobile Tutorial" app should automatically launch. Enjoy!
6
Click Devices Click Bluetooth
Click Add Device
Select MindWave and
click Next
Select MindWave
Click Add Device
click Next
Click Bluetooth Devices Select the Devices
click Add
Select MindWave and Select "Let me choose my
click Next own passkey", enter

Quick Start Guide

Pour obtenir des instructions en visite Française:
Eine Anleitung in deutscher Sprache finden Sie unter:
索取中文指南请访问： 網上索取中文使用手冊請到：
http://mindwavemobile.neurosky.com
1 -

MindWave Headset Basics

The Headset

Before You Start

Insert One (1) Rotate the Sensor Power Located Here
AAA Battery Arm Down
Para instruções em Português visite:
Para obtener instrucciones en Español visite:
한국어 설명 안내 :
日本語での手順はこちら ：

How to Wear the MindWave Headset

Should rest on the head as
shown with the sensor tip touching the forehead, the ear loop behind the ear
and the clip attached.
Check these areas to get the best fit
Rotate Sensor Clip on Ear Sensor on Left
Headset will be
Headset will be OFF
The LED will be OFF
The first time the headset is turned
on the LED will Quickly Flash Blue
and Pairing Mode
start. You will have 2 minutes to
pair the headset.
Slide to "Pair" to activate Pairing.
LED will Flash Blue
Behind Ear
ON
will automatically
for 2 minutes