Sound Adjustment Adjusting The Sound - Sony MHC-WX7AV Operating Instructions Manual

Sound Adjustment
Adjusting the sound
You can reinforce the bass, create a more
powerful sound, and listen with headphones.
(Power)
DBFB
DSP
CD
PHONES
DBFB +/–
PHONES
To reinforce bass (DBFB)
1 Press DBFB*.
Every time you press the button, the
display changes as follows:
DBFB (level)
2 Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel.
Press DBFB + or DBFB – to adjust DBFB
level.
The display changes as follow:
DBFB MAX ˜ DBFB HIGH ˜ DBFB
MID ˜ DBFB LOW
* DBFB = Dynamic Bass Feedback
30
GROOVE
OPEN/CLOSE
EQ
n DBFB OFF
For a powerful sound (GROOVE)
Press GROOVE. The volume switches to
power mode, DBFB is automatically set to full
strength, the equalizer curve changes, and the
GROOVE button lights up. Press GROOVE
again to return to the previous volume.
Notes
• With some songs, the music will sound distorted
when you use the DBFB system with the graphic
equalizer if the bass is too strong. Adjust the bass
slowly while listening to music so that you can
monitor the effect of the adjustment.
• Cancelling GROOVE sets DBFB to "DBFB LOW"
and flattens the equalizer curve. Press DBFB +/–
to adjust DBFB level. Adjust the equalization to
obtain the effect you desire.
To listen through the headphones
Connect the headphones to PHONES jack. No
sound will come from the speakers.