Samsung Multifunction Xpress C48 series User Manual page 108

Understanding display messages
Message
Error: [error The imaging unit is installed
number] improperly, or the cover is
not securely latched.
Door open/close
Error: [error The machine unit cannot be
number] controlled.
Turn off then on
ID Control Fail There is a problem in the
CTD sensor.
Check CTD Sensor
Output bin Full The output tray is full. Or the
sensor is not facing down.
Remove paper
Prepare The life of the fuser unit will
be expired soon.
Fuser Soon
Prepare new The life of the imaging unit
will be expired soon.
Imaging unit
Meaning Suggested solutions
Reinstall the imaging unit
to confirm it is seated
properly. Close the cover
until it locks into place.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Reboot the power. If the
problem persists, please
call for service.
Remove papers from the
output tray, the machine
resumes printing. Or make
sure the sensor is facing
down. If the problem
persists, call for service.
Prepare the fuser unit with
a new one. Contact the
service representatives.
Replace the imaging unit
with a new one. Contact
the service
representatives.
Message Meaning
Prepare new The life of the transfer belt
will expired soon.
Transfer belt
Prepare new The life of the transfer belt
will expired soon.
transfer roller
Replace new The life of the fuser unit will
be expired.
Fuser unit
Replace with The life of the imaging unit
will be expired.
new imaging unit
Replace The life of the transfer belt
newTransfer belt has expired.
Replace new The life of the transfer belt
has expired.
transfer roller
Suggested solutions
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace the fuser unit with
a new one. Contact the
service representatives.
Replace the imaging unit
with a new one. Contact
the service
representatives.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace the transfer belt
with a new one. Contact
the service
representatives.
108
4. Troubleshooting