Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light - Dodge Challenger 2012 Owner's Manual

Hide thumbs Also See for Challenger 2012:
Table of Contents

Advertisement

304 STARTING AND OPERATING
The "ESC Off" switch is located in the switch bank near
the bottom center of the instrument panel. To enter the
"Partial Off" mode, momentarily press the "ESC Off"
switch and the "ESC Activation/Malfunction Indicator
Light" will illuminate. To turn the ESC ON again, mo-
mentarily press the "ESC Off" switch and the "ESC
Activation/Malfunction Indicator Light" will turn off.
NOTE: To improve the vehicle's traction when driving
with snow chains, or when starting off in deep snow,
sand, or gravel, it may be desirable to switch to the
"Partial Off" mode by momentarily pressing the "ESC
Off" switch. Once the situation requiring "Partial Off"
mode is overcome, turn the ESC ON again by momen-
tarily pressing the "ESC Off" switch. This may be done
while the vehicle is in motion.
WARNING!
When in "Partial Off" mode, the TCS portion of ESC,
except for the limited wheel spin feature described in
the TCS section, has been disabled and the "ESC Off
Indicator Light" will be illuminated. All other stabil-
ity features of ESC function normally. When in
"Partial Off" mode, the enhanced vehicle stability
offered by the ESC system is reduced.
ESC Activation/Malfunction Indicator Light and
ESC OFF Indicator Light
The "ESC Activation/Malfunction Indicator
Light" in the instrument cluster will come on
when the ignition switch is turned to the ON
position. It should go out with the engine
running. If the "ESC Activation/Malfunction Indicator
Light" comes on continuously with the engine running, a
malfunction has been detected in the ESC system. If this

Advertisement

Table of Contents
loading

Table of Contents