Sony VPL-VW300ES Operating Instructions Manual page 36

Setting items
Network Setting
IPv4 Setting
IPv6 Information
36
Installation Menu
Description
When "Zone" is selected: Select the position to adjust with </,
buttons for the horizontal position (H position) and M/m buttons for
the vertical position (V position), then press
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Note
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
Perform internet protocol settings.
IP Address Setup: Selects the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: Specifies the IP address manually.
When "Manual" is selected for "IP Address Setup," select the item
with the </, buttons and input the value with the M/m buttons.
When all items are entered, select "Apply," and then press the
button. The entered settings will be registered.
IP Address: Sets the unit's IP address.
Subnet Mask: Sets the unit's subnet mask.
Default Gateway: Sets the unit's default gateway.
MAC Address: Displays the unit's MAC address. This cannot be
changed.
Apply: Enables the IP address that is set manually.
Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 38).
.