Memory Function; Selectshift Automatic ® Transmission - Ford 2015 Fusion Quick Reference Manual

COMFORT
Climate Controlled Front Seats
To access, press the Climate corner on the touchscreen.
For heated front seats, press
the various heat modes and off. For cooled seats, press
repeatedly to cycle through the various cool modes and off. If your
vehicle is not equipped with a touchscreen, use the hard button
controls (indicated by the same symbol) to cycle through the
various modes and off.
Moonroof
*
Your moonroof controls are located on the overhead console and
have a one-touch open and close feature. To open the moonroof,
press the . It will stop short of the fully opened position to
help reduce wind noise. To close, press the
feature, press the
Open Window Buffeting
When only one side window is open, you may hear a pulsing noise.
Open both windows on the same side of the vehicle to alleviate
this noise.
1506547_15a_Fusion_QRG_042314.indd 15
*
repeatedly to cycle through

Memory Function

*
Use the memory controls on the driver's
door to program and then recall memory
positions. Move the seats and mirrors to
the desired positions. To program up to
three positions, press and hold the desired
preset button until you hear a single tone.
Use the controls to recall the set positions.
. To use the venting
button.
Tilting Head Restraints
The front head restraints have
a tilting feature for extra comfort.
To Tilt the Head Restraint
Adjust the seatback to an upright driving
or riding position. Pivot the head restraint
forward toward your head to the desired
position. Once it is in the forward-most
position, tilting it forward once more will
release it to the upright position.
NOTE Do not attempt to force the head restraint backward after
it's tilted. Instead, continue tilting it forward until the head restraint
releases to the upright position.
SelectShift Automatic
Gives you the ability to manually change gears if you like.
To use, move the gearshift lever from drive (D) to sport (S).
If Equipped with the Toggle Located on the Gearshift Lever
» Press the (+) button to upshift.
» Press the (–) button to downshift.
If Equipped with the Steering Wheel Paddles Located on Your
Steering Wheel
» Pull the right paddle (+) to upshift.
» Pull the left paddle (–) to downshift.
Transmission
*
®
*if equipped
4/23/14 9:41 AM
15