Weil-McLain Aqua Plus 35 Product Manual page 16

AQUA PLUS
INDIRECT
Boiler-side piping
Multiple water heaters — domestic water piping
Failure to install automatic
mixing valve where recom-
mended can result in severe
personal injury or death.
1. This drawing is conceptual
only. It shows representa-
tive piping components
and layout. Weil-McLain
does not represent that this
drawing meets any partic-
ular mechanical or build-
ing codes. The installer is
responsible for inclusion
of all required safety de-
vices, or other miscella-
neous piping hardware not
shown on drawing. The
installer is responsible for
proper sizing / selection of
all hardware shown on this
diagram.
2. Wire water heater thermo-
stats in series when con-
necting to boiler controller
or boiler T-T terminals.
3. Install automatic mixing
valve at either the system
hot water connection or
at each water heater.
4. See page 8 through page 10
for additional recircula-
tion information and pip-
ing details.
16
-
FIRED WATER HEATERS
(continued)
Alternate methods of revers-return piping and Easy-Fit® Manifold detail
— Product Manual
Part number GL-E223-ADOC 0615