Meade 8 x 42 2.0D CaptureView TM Integrated Binocular and Digital Camera Operating Instructions Manual page 18

VI. Downloading and Software Installation
No driver is necessary for downloading your pictures or movies unless you are using Windows 98.
Just attach one end of the USB cable to the camera's USB port (2, Fig. 2) and the other end to
your PC's USB port. Refer to Fig. 3. Your PC considers the camera as a mass storage device and
displays it like a hard drive. You can then copy your still pictures or movies to your computer or
even copy files to the flash card on your camera.
Note: You may have to change the drive letter using your PC's Disk Management function if the
flash card tries to use a drive letter that is already in use (e.g., E:).
For Win98 Users
Note for Win98 Users: DirectX 8.1 or higher must be installed on your PC before you can
download images. If you do not have DirectX 8.1 or higher on your PC, DirectX 8.1 is included
on the CD ROM. To install, click the "Install DirectX" button on the CD ROM.
1.Install the software first.
2.Insert the provided CD ROM into your CD ROM drive.
3.The CaptureView Manager menu displays. Click on the "CaptureView 2.0D Manager (Windows
98 only)."
Note: Only click on the "CaptureView 2.0D Manager (Windows 98 only)" button; do not click on
any of the other CaptureView Manager buttons.
4.The driver setup begins. Follow the on-screen directions. Note that if a window displays that
gives you a choice of buttons to "Continue Anyway" or "Stop Installation," click on "Continue
Anyway."
5. After the setup is complete, follow any on-screen instruction (e.g., "Restart Computer"). Using
the provided USB cable, plug the one end of the cable into the camera's USB port and the other
end into your PC's USB port. Refer to Fig. 3.
6.Wait for about 10 seconds, follow any on-screen instructions. You may now download images to
your PC using the CaptureView Manager.
7.Click on the "CaptureView Manager Manual" button to display the on-screen instruction manual
for the CaptureView Manager software.
Do not plug your camera in until step #5.