Viper SmartKey VSK100 Quick Reference User Manual

SMARTKey
SMARTKey
Congratulations on the purchase of your state-of-the-art Viper SmartKey system. Reading this user's guide prior
to using your system will get you off to a quick and smooth start.
Start Here
Before you can start using your system, the following steps must be performed:
1. Download the free Viper SmartStart app from iTunes App Store or Google Play.
Note: Accessing Viper SmartKey passive locking features requires v3.2 app or newer.
2. Have the Viper SmartKey system installed by your authorized Viper dealer.
3. Follow the steps below to finish connecting your smartphone to your installed Viper SmartKey module.
Note: Your Viper SmartKey may be used as a standalone unit or connected to an existing Viper system. As a result functional-
ity/screen appearance may differ slightly across systems.
Set up your app to connect with Viper SmartKey
Home Screen
1. Place your Viper SmartKey system in discovery
mode by holding down the pairing button on the
module until the LED turns blue (pairing button is
the one furthest away from the LED).
2. Open your phone's Bluetooth menu, make sure
Bluetooth is turned on. Look for your Viper Smart-
Key device name on the list of available Blue-
tooth devices (SmartStartBT-xxxx). Tap on the de-
vice name to pair your phone to it. The blue LED
on your Viper SmartKey module begins flashing
quickly when it connects to your phone at the
end of the pairing process, then turns solid blue
to indicate a successful connection.
3. Open your SmartStart app, then go to More/
Settings and make sure the Bluetooth switch is
turned on.
QRGVSK100 2014-02
Cars Screen-My Vehicles Cars Screen-Add Vehicle

Quick Reference

4. Go to the Cars tab and press the (+) button on
the top right of header. Follow the instructions on
the page to either Add a standalone SmartKey
system, or Link to associate the SmartKey device
with an existing vehicle on your Cars page.
5. Select the SmartKey or SmartStart Bluetooth de-
vice you want to add to the app. For standalone
systems, you can edit the name and add a pic-
ture to make it easier to select that vehicle when
using the app.
6. When you have finished setting up your app to
connect with your Viper SmartKey system, you
can send active commands from the main user
interface page. The app automatically detects
whether you are connected and routes your com-
mands over the high speed Bluetooth connection
any time it is available.
User's Guide
VSK100
Cars Screen-SmartKey