Optoma TWR1693 Manual page 42

User Controls
Setup | Network
Network
English

Press Enter to apply Network settings. If the connection is successful,
the OSD display will show the following dialogue box.
Network State—to display network information.
4
DHCP:
4
On: Assign an IP address to the projector from the DHCP server
automatically.
Off: Assign an IP address manually.
IP Address—Select an IP address
4
Subnet Mask—Select subnet mask number.
4
Gateway—Select the default gateway of the network connected to the
4
projector.
DNS—Select DNS number.
4
4 Apply—Press Enter to apply the selection.
Meijer.com