Table of Contents
Advertisement
Pump filter
It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged
pump filter may reduce the bubble effect.
NOTE
If the pump filter is clogged, an information code of "5C" appears on the screen.
CAUTION
• Make sure the filter cap is closed properly after cleaning the filter. Otherwise, this may
cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
WD75J5410AW_03588Y_EN.indd 45
A
1. Turn off the washing machine, and
unplug the power cord.
2. Drain the remaining water inside the
drum by referring to "Emergency drain"
on page 43.
3. Open the filter cover using a coin or key.
4. Turn the pump filter knob (A) to the left,
and drain off the remaining water.
5. Clean the pump filter using soft brushes.
Make sure the drain pump propeller
inside the filter is unclogged.
6. Reinsert the pump filter, and turn the
filter knob to the right.
NOTE
• Some pump filters feature a safety knob
that is designed to prevent accidents
by children. To open the safety knob
of the pump filter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the filter.
• To close the safety knob of the pump
filter, turn it clockwise. The spring makes
a rattling sound, which is normal.
English 45
2015/4/28 15:50:10
Advertisement
Table of Contents
