Download Print this page
DEK CH1 Owner's Manual

DEK CH1 Owner's Manual

2-way feed chipper / shredder
Hide thumbs Also See for CH1:

Advertisement

Quick Links

2-Way Feed Chipper / Shredder
This manual contains important safety instructions for Chipper/Shredders
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY, SAVE THESE INSTRUCTIONS.
Contents:
Warnings & Specifications
Component Identification
Assembly
Important Engine Information
Operating Instructions
Maintenance & Storage
Troubleshooting
Warranty & Service
DO NOT RETURN THIS CHIPPER SHREDDER
Have the following information ready when you call us:
Date of Purchase:
_______________________
Location of Purchase:
_______________________
Serial #:
_______________________
Model #:
_______________________
DEK® is registered trademark of GXi International, LLC Clayton, NC 27520 USA
No part of this publication can be printed or copied without written permission.
Rev: 1/23/2008
®
Heavy Duty Power Equipment
Owner's Manual
TO THE STORE!
HAVE QUESTIONS OR NEED HELP?
call 24 hrs / 7-days a week help-line: [1] 800-393-0668
or go to www.DEKPowerUSA.com
DEK® is exclusively distributed by GXi International, LLC
1 of 11

Advertisement

loading
Need help?

Need help?

Do you have a question about the CH1 and is the answer not in the manual?

Questions and answers

Summary of Contents for DEK CH1

  • Page 1 Serial #: _______________________ Model #: _______________________ DEK® is registered trademark of GXi International, LLC Clayton, NC 27520 USA No part of this publication can be printed or copied without written permission. DEK® is exclusively distributed by GXi International, LLC Rev: 1/23/2008...
  • Page 2 Disconnect the spark plug wire and ground it against GXi International, LLC, exclusive marketer of DEK Heavy Duty the engine. Power Equipment, reserves the right to discontinue or change specifications or design at any time without notice and without incurring any obligation what so ever.
  • Page 3 Lawn tractor or ATV trailer hitch (maximum tow speed is 15 mph). Clean out and blade access hatch Discharge Chute Hardware bag, safety de- vices and chip collection Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 3 of 11...
  • Page 4 15. Muffler and engine become hot and can cause a burn. Do debris. not touch. Allow machine to cool at least 5 minutes before 16. Never pick up or carry machine while the engine is running. storing. Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 4 of 11...
  • Page 5  Wrench for assembly of the chute and funnel  Hardware bag with a spare blade 8. Re-connect the spark plug wire Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 5 of 11...
  • Page 6 Read them carefully. If a label comes off or becomes ground against the engine to prevent inadvertent starting of the hard to read, contact your DEK dealer for a replacement. machine. This step should be taken as a precaution whenever you are performing service on this machine.
  • Page 7: Starting The Engine

    This noise is caused by the flails and fingers, which are part of the shredding mechanism, and it should be expected until the impeller reaches full speed. Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 7 of 11...
  • Page 8 Refer to engine manual for correct engine storage instruc- tions Store unit in a clean, dry area. Do not store next to corro- sive materials such as fertilizer. Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 8 of 11...
  • Page 9 250 - 300 in. lbs. NOTE: Make certain blades are reassembled with the sharp edge facing upward. Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 9 of 11...
  • Page 10: Troubleshooting

    Chipper blade dull. Replace chipper blade or see your authorized service dealer. NOTE: For repairs beyond the minor adjustments listed above, contact your nearest authorized service dealer. Rev: 1/23/2008 DEK® is exclusively distributed by GXi International, LLC 10 of 11...
  • Page 11 WHAT DEK POWER EQUIPMENT WILL REPAIR OR REPLACE UNDER WARRANTY: DEK will repair or replace, at its option, any part that is proven to be defective in material or workmanship under normal use during the applicable warranty time period subject to the exclusions stated herein. This warranty is void if the owner fails to follow the prescribed maintenance and operating procedures described in this manual.