NordicTrack NTEL01310.3 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin.
Remove the screws (not shown) and the ship-
ping bracket (not shown) from the front of the
Frame (1). Discard the screws.
With the help of a second person, place the
shipping bracket (not shown) under the front of
the Frame (1). Have the second person hold
the Frame to prevent it from tipping while
you complete this step.
Attach the Front Stabilizer (6) to the Frame with
two M10 x 90mm Patch Screws (84). Then,
remove and discard the shipping bracket (not
shown).
2. Orient the Front Stabilizer Cover (8) as shown.
Press the Mounts (117) on the Front Stabilizer
Cover (8) into the Frame (1). Then, press the
Front Stabilizer Cover into place.
3. Remove the screws (not shown) and the ship-
ping bracket (not shown) from the rear of the
Frame (1). Discard the screws.
With the help of a second person, place the
shipping bracket (not shown) under the rear of
the Frame (1). Have the second person hold
the Frame to prevent it from tipping while
you complete this step.
Orient the Rear Stabilizer (5) so that the welded
tubes are in the locations shown.
Attach the Rear Stabilizer (5) to the Frame (1)
with two M10 x 75mm Patch Screws (119).
Then, remove and discard the shipping bracket
(not shown).
1
2
3
3
5
119
Welded Tubes
6
84
6
1
8
117
1
1