Vengeance Specifications / Tube Chart; Features And Specifications - Egnater VENGEANCE Owner's Manual

FEATURES AND SPECIFICATIONS

• 120-Watt All Tube Head
• Premium Tubes:
• 4 x EL34 & 6 x 12AX7
• Selectable Full/Half Power
Switch (120/60-Watts)
• Two Independent Channels
each With:
• Volume, Gain and 3-band EQ
• Tight and Bright Voicing Switches
• Mid Cut/Boost Voicing Switch
(Footswitchable)
• High/Low Gain Switch
• Independent Reverb Controls
with "Spillover"
• Master Controls:
• Presence & Density
• Main and Secondary Master Volumes
V1 - V6 = 12AX7
PTV1 - PTV4 = EL34
Egnater Amplification is dedicated to product excellence and therefore continuously attempts to improve each and every model we
manufacture. This ongoing process includes refinements in design, materials and workmanship which may result in products which
differ than those described in our literature. All features, specifications, prices and terms are subject to change without notice.
18
V5 V4
PT PT
V6
V1 V2
• Six Button Footswitch for Channel
Select, Channel 1 Mids, Channel 2 Mids,
Effects Loop, Reverb and 2nd Master
Volume
• Assign the Effects Loop and 2nd Master
to Channel 1, Channel 2 or Both
• Connects to Amp Via a Standard
XLR Cable
• Additional ¼" Jacks for External Control
of Switching Functions
• Simple Bias Adjust with External
Test Points
• Balanced XLR Cabinet Voiced Line /
Recording Output
• Buffered Effects Loop with Send and
Return Levels
• 117VAC//230VAC Voltage Selector
V3 V2 V1
PT PT
V3 V4
ODS
ODV