Input; Menu (On Tv's Front Panel); Light - JVC AV-48WP30 User Manual

AV-48WP30 English 3/12/02
Button Functions

INPUT

The AV-48WP30 can receive signals from a variety of sources. Use
the I button to select the signal source: Antenna (for signals
NPUT
from the RF coaxial cable) or VIDEO 1 through VIDEO 4 (for sig-
nals from an audio/video device like a DVD player or VCR) or
DIGITAL-IN.
The INPUT menu will appear when you press I
signal source, press I
the menu. If no device is connected to an input, a grey screen will
appear. When you have selected a signal source, either press E
to leave the menu or wait a few seconds for the menu to disappear
automatically.
• Pressing C +/- will automatically select the antenna (12) as the
H
source.

MENU (on TV's Front Panel)

You can also access the onscreen menu system by pressing the M
sion's front panel. When you press this button, an additional onscreen menu will appear.
This menu will show you the current channel (07 on the menu shown above), the current signal
input in use.
You can move to the other onscreen menus by pressing the # arrow.

LIGHT

The remote control includes illuminated buttons for key features like C
the L button to turn the illumination on. The illumination will shut off automatically after a
IGHT
few seconds.
58
2:54 PM Page 58
NPUT
, each press will move to the next item in
NPUT
FRONT PANEL CONTROL
CHANNEL
INPUT
NEXT PAGE
SELECT BY FRONT KEY
OPERATE BY
FRONT KEY
INPUT
VIDEO-1
. To select a
VIDEO-2
VIDEO-3
XIT
VIDEO-4
DIGITAL-IN
INPUT Menu
button on the televi-
ENU
07
TV
+/- and V
H
12
+/-. Press
OL