Honda MP3 PLAYER ATTACHMENT KIT Installation Instructions page 4

10. Install the hazard switch (removed in step 6) into
the player panel.
PLAYER
PANEL
11. Plug the bus cable 14-pin connector into the audio
unit and into the player. Install the harness clip to
the rear of the player with the 4 x 8 mm washer-
screw.
AUDIO
UNIT
PLAYER
4 of 5
HAZARD
SWITCH
14-PIN
CONNECTOR
BUS
CABLE
4 x 8 mm
WASHER-
HARNESS
SCREW
CLIP
12. Secure the bus cable with the harness clip.
4701031T
13. Plug the vehicle connectors into the audio unit,
and into the player.
AUDIO
UNIT
PLAYER
AII 36661 (0705)
HARNESS CLIP
BUS CABLE
VEHICLE 20-PIN
CONNECTOR
ANTENNA
CONNECTOR
VEHICLE 14-PIN
CONNECTOR or ACCESSORY
XM RADIO 14-PIN
CONNECTOR
(if equipped)
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
HAZARD
SWITCH
CONNECTOR