Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Drill Master 40070
Summary of Contents for Drill Master 40070
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 40070... -
Page 3: Electrical Safety
Switch or energizing power tools that Eye protection must be ANSI-approved have the Switch on invites accidents. and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 40070 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Power Tool Use And Care
Turn off the tool, and unplug it from approved respirator and ANSI approved its electrical outlet before leaving. safety goggles. Avoid skin exposure. Proper ventilation in the work area is required. Page 4 For technical questions, please call 1-800-444-3353. Item 40070... -
Page 5: Vibration Safety
If any abnormal vibration (such as tingling, numbness, vibration occurs, stop use immediately. and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 40070 For technical questions, please call 1-800-444-3353. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either Outlets for 2-prong plug of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Page 6 For technical questions, please call 1-800-444-3353. Item 40070...
-
Page 7: Extension Cords
Volts Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. Alternating Current WARNING marking concerning Risk of Electric Shock. Properly connect power Amperes cord to appropriate outlet. Item 40070 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Specifications
6 dust collection holes in the Backing Pad (28). (There are 4 other holes in the Backing Pad for the Screws (29).) Backing Backing clamp Page 8 For technical questions, please call 1-800-444-3353. Item 40070... - Page 9 4. Contact the workpiece with minimal pressure. unplug it after use. Clean, then store the Use sandpaper with a lower grit number tool indoors out of children’s reach. to remove material faster. Item 40070 For technical questions, please call 1-800-444-3353. Page 9...
-
Page 10: Maintenance
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-800-444-3353. Item 40070... -
Page 11: Parts List And Diagram
Strain Relief Screw Armature Asm. Screws Circuit Board Rubber Pin Left Housing Bolt-Short part 0 - Dust art 0 - Dust ollection ollection hute - not shown. hute - not shown. Item 40070 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.