Connecting An Hdmi; Or Dvi Device To The Hdmitm; Input - Toshiba 58L7350U User Manual

Connecting
YourTV 3 7
Connecting an HDM1
TM
or D FI device to the HDM1
TM
inpu
Connecting a n HDMI
T M
or DVIdevicetothe HDMI
T M
input
The HDMI
TM
input on your TV receives digital audio and uncompressed
digital video from an HDMI
TM
source device, or uncompressed digital
video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High- Bandwidth Digital-Content
Protection) program material in digital form from EIA/CEA-861-D-
compliant[l] consumer electronic devices (such as a set-top box or DVD
player with HDMI
TM
or DVI output).
The HDMI
TM
input can accept and display VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p
(24Hz/30Hz/60Hz) signal formats. For detailed signal specifications, see
"HDMI
TM
signal formats" on page 187.
The supported Audio formats are Linear PCM and Dolby _ Digital,
sampling rate 32/44.1/48 kHz.
NOTE Toconnect a PCto theHDMI
T M
input,see"Connect a computer t o theTV's
HDMI
T M
terminal"on page 42.
To connect an HDMI T''device, you will need one HDMI
TM
cable (type A
connector) per HDMI
TM
device:
o:o For proper operation, it is reco_mnended that you use an HDMI
TM
cable with the HDMI T'' L ogo (H--lml).
o:o To display an 1080ip/60Hz signal format, you will need a High
Speed HDMI _'' cable. A conventional HDMI_'/DVI cable may not
work properly.
o:o HDMI _'_cables transfer both video and audio. Separate analog audio
cables are not required (see illustration).
HDMi
TM
device (satelliteor
cablebox, DVDplayer,etc)
DVidevice
(Sample Illustra#on) L 7350U Series--Connecting an HDMF' or DVI
device to the HDMF' Input