Foxconn PL7MA User's Manual page 46

vVideo Off Method
This option is used to define the video off method."Blank Screen" mode means
that after the computer enters power saving mode,only the monitor will close,
however ,the vertical and horizontal scanning movement of the screen
continues.W hen you select the "V/H SYNC+Blank " mode the vertical and
horizontal scanning movement of screen stops when the computer enters
power saving mode ."-DPMS" mode is a new screeen power management
system, and it needs to be supported by the monitor you are using.
vVideo Off In Suspend
This option is used to determine whether the video is turned off when the
system enters sleep mode. The setting values are:Yes and No.
vSuspend Type
This option is used to set sleep mode.
vMODEM Use IRQ
This option is used to set the IRQ in which the modem can use.The system
will automatically wake up when the modem receives an incoming call. In
order for this function to work, the Fax/Modem must be connected to the W OM
header on the motherboard.
vSuspend Mode
This option is used to set the idle time before the system enters into steep
status.
vHDD Power Down
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time.
vSoft-Off by PWR-BTN
This option is used to set the power down method.This function is only valid
for systems using an ATX power supply.
vCPU THRM-Throttling
This option is used to specify the CPU speed (at percentage) to slow down
the CPU when it reaches the predetermined overheat temperature. The set
ting values are 75.0%,50.0%,25.0%.
Chapter 3 BIOS Description
39