KitchenAid KERC507 Manual page 14

¢_sing and Caring forYour Cooktop
Replacing the cooktop light:
1. Unplug appliance or disconnect at main
power supply,
Usingand replacingthe cooktop light
The fluorescent light is on the top of the
control panel. The cooktop light switch is on 8/'_
the control panel. Press it to turn on the "V'/
cooktop light, Press it again to turn light off.
2. Flip up the top of the control panel,
4.
If the cooktop light still does not work,
you may need to replace the starter. The
starter is a knob-shaped part located on
the right side of the backguard, under the
light bulb. To remove and replace the
starter, first remove light bulb. Push
starter in and turn approximately 90 °
counterclockwise. Pull starter out of
recessed area. You can find replacement
starters at stores that sell fluorescent
tubes.
Close the top panel, Plug in appliance or
reconnect at main power supply,
3. Grasp the fluorescent tube at both ends.
Turn the tube approximately 90 ° in either
direction until both ends come out of the
receptacles. Replace with a 20-watt cool-
white fluorescent tube.
14