Opel Automobile Owner's Manual page 135

3. Insert a screwdriver into the
opening as far as it will go and
move the selector lever out of P or
N. If P or N is engaged again, the
selector lever will be locked in
position again. Have the cause of
the power supply interruption
remedied by a workshop.
4. Mount the selector lever trim on
the centre console and refit.
Remove ignition key from ignition
switch
Take the special tool from the inside
of the glove box cover.
Driving and operating
Insert the special tool into the opening
below the ignition lock as far as it will
go and swivel it slightly.
135