Service Note; Disk Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection); Boards Connection - Sony RDR-HX1010 Service Manual

1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

1. Remove the upper case.
2. Insert the stiff wire in the hole and eject the tray.

2. BOARDS CONNECTION

SERVICE NOTE

Open the tray
Fig. 1
Connector (CN1702)
RD-58 board
The stiff wire
Connector (CN1701)
CN1901
Two RD51-AV relay boards
Two RD51-AV extension flexible flat cables
Two RD51-AV relay boards
MI-056 board, MI pwb bracket
Connector (CN501)
Connector (CN502)
— 5 —
Hole
Fig. 2