Settings And Adjustments; Aerial Reception And Language Settings (Settings) - Sony RDR-HX1010 Service Manual

2
Select "DV EDIT," and press ENTER.
The display asks if you want to start selecting
scenes.
Scenes Selection
Do you want to select a scene?
Start Cancel
• If you have previously saved a programme,
the display asks if you want to edit an
existing programme or to create a new
programme. To resume editing the existing
programme, select "Saved Data," and go to
step 6.
3
Select "Start," and press ENTER.
The display for setting the IN point (start of
the scene) appears.
The scene starts to play in the background.
Select scene(Set IN point)
Controlling...
4
Select the IN point by pressing m/M,
and press ENTER.
The display for setting the OUT point (end of
the scene) appears. The scene starts to play in
the background from the IN point.
5
Select the OUT point by pressing m/M,
and press ENTER.
The display asks if you want to add the
selected scene to the Scene List menu.
To preview the scene, select "Preview."
To reset either the IN or OUT point, select
"Change IN" or "Change OUT," and repeat
from step 4.
Scenes Selection
Do you want to capture the scene
between IN 0:00:30 and OUT 0:00:52?
OK Cancel
Preview Change IN Change OUT
80

Settings and Adjustments

Aerial Reception and
Language Settings
(Settings)
The "Settings" setup helps you to make tuner,
clock, and programme position settings for the
recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Settings," and press ENTER.
The options of "Settings" appear. The default
settings are underlined.
To turn off the display, press SYSTEM
MENU repeatedly.
SETUP
Settings Channel Setting
Video Channel List
Audio TV Guide Page
Features Clock
Options Language
Easy Setup
Channel Setting
Presets programme positions manually.
If some programme positions could not be set
using the "Easy Setup" function, you can set them
manually.
If there is no sound or if the picture is distorted, the
wrong tuner system may have been preset during
"Easy Setup." Set the correct tuner system
manually in the steps below.
1
Select "Channel Setting" in "Settings," and
press ENTER.
Settings - Channel Setting
Prog. 1
System : BG
Normal / CATV : Normal
Channel Set : C 3
Station Name : AAB
PAY - TV / CANAL+ : Off
Audio : NICAM
82
6
Select "OK," and press ENTER.
A new Scene List menu appears with the
selected scene.
To add a scene, select "Add."
DV EDIT
SCENE LIST Total 0:00:22
Scenes 1
OK
0:00:30-0:00:52
1
0H00M22S
Quit
Add
A Thumbnail picture
B Time information
C Total duration of the program
D Total number of scenes
7
When you finish adding scenes, select the
scene you want to edit, and press ENTER.
The sub-menu appears.
"Move": Changes the scene order. Follow the
explanations on the screen to change the order
by pressing M/m and ENTER.
"Erase": Erases the scene. When asked for
confirmation, select "OK."
"Preview": Plays the selected scene.
"Change IN": Changes the start of the scene.
Repeat from step 4.
"Change OUT": Changes the end of the scene.
Repeat from step 5.
8
When you finish editing the Scene List,
select "OK," and press ENTER.
The display for entering the title name
appears. To enter a new name, select "Enter,"
and follow the explanations on page 36.
Title Name
Enter the title name.
DV 11.10.03 13:30 - 12.11.03 16:46
OK Enter
2
Press PROG +/– to select the programme
position.
Selected programme position
Settings - Channel Setting
Prog. 8
System : BG
Normal / CATV : Normal
Channel Set : C 2
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
3
Select "System," and press ENTER.
Settings - Channel Setting
Prog. 8
System : BG
BG
Normal / CATV : Normal DK
Channel Set : C 3
I
Station Name : AAB L
PAY - TV / CANAL+ : Off
Audio : NICAM
4
Select an available TV system, BG, DK, I, or
L, and press ENTER (page 83).
BG Select this when in West
European countries, except
those listed in "Receivable
channels" on page 83.
DK Select this when in East
European countries.
I Select this when in Great
Britain/Ireland.
L Select this when in France.
5
Select "Normal/CATV," and press ENTER.
Settings - Channel Setting
Prog. 8
System : BG
Normal / CATV : Normal Normal
Channel Set : C CATV 3
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
6
Select "Normal," and press ENTER.
To set CATV (Cable Television) channels,
select "CATV."
7
Select "Channel Set," and press ENTER.
Settings - Channel Setting
Prog. 8
System : BG
Normal / CATV : Normal
Channel Set : C C2 3
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
9
Select "OK," and press ENTER.
The default title name is fixed, and the display
asks if you want to start recording.
To change the disc media, select "Media" and
press M/m. To change the dubbing mode,
select "Dub Mode" and press M/m.
DV Dubbing 2.6
Change the dubbing mode if necessary.
Select "Start" to start dubbing.
Media Dub Mode
Start
DVD SP 0.8 GB
Cancel
Data capacity required for the dubbing.
10
Select "Start," and press ENTER.
The recorder starts recording the tape contents
as programmed.
• If the recording does not fit due to the
dubbing mode you selected, the display asks
if you want to continue.
To change the dubbing mode, select "Reset"
and repeat from step 9.
To have the recorder adjust the dubbing
mode, select "Auto Dub Mode."
• If there is not enough disc space even after
changing the dubbing mode, the display
asks if you want to record halfway.
To continue, select "OK."
To stop during recording
Open the remote's cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
b
Notes
• Contents recorded to the HDD or a DVD may not be
recorded as programmed if the tape's time code is not
sequential or there are blanks between the recordings
on the tape. In this case, see "Recording from
connected equipment without a timer" on page 52.
• The start and end points of a programme may be
different from what you have set if the source DV/
Digital8 format tape is in any of the following
conditions:
– Recording mode was changed during the recording.
– There is a blank space in the recorded portion of the
tape.
• If you set the beginning of the tape as the IN point and
the end point as the OUT point, the IN and OUT points
may move slightly during dubbing.
• You cannot set a scene to be shorter than one second.
8
Press M/m repeatedly until the channel you
want is displayed, then press ENTER.
The channels are scanned in the order shown
in the table below.
• If you know the number of the channel you
want, press the number buttons. For
example, for channel 5, first press "0" and
then press "5." Then press ENTER.
9
Select "Audio," and press ENTER.
Settings - Channel Setting
Prog.
System : BG
Normal / CATV : Normal
Channel Set : C 5 5
Station Name : CDE
PAY - TV / CANAL+ : Off NICAM
Audio : NICAM Standard
NICAM
Normally, select this.
Standard Select this if the sound from
NICAM broadcasts is not
clear.
10
Select "NICAM," and press ENTER.
11
Select "AFT" and press ENTER.
Settings - Channel Setting
Prog.
Normal / CATV : Normal
Channel Set : C 5 5
Station Name : CDE
PAY - TV / CANAL+ : Off
Audio : NICAM
On
AFT : Off
On Turns on the Auto Fine
Tuning function. Normally,
select this.
Off Allows you to adjust the
pictures manually.
12
Select "On" to turn on AFT, and press
ENTER.
• If the Auto Fine Tuning function does not
work effectively, select "Off" and press
ENTER. When the fine tuning bar appears,
press </, to obtain a clearer picture, and
press ENTER.
• To preset another channel, repeat from step
2.
1-20
GB
Receivable channels
TV system Channel coverage
BG (West European E2 – E12 VHF
Countries, except
Italia A – H VHF
those listed below)
E21 – E69 UHF
S1 – S20 CATV
S21 – S41 HYPER
8
S01 – S05 CATV
DK (East European R1 – R12 VHF
Countries)
R21 – R69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
I (Great Britain/ Ireland A – J VHF
Ireland)
South Africa 4 – 13 VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
8
L (France) F2 – F10 VHF
F21 – F69 UHF
B – Q CATV
S21 – S41 HYPER
Tuning the French CATV channels
This recorder can scan the CATV channels B to Q
and the HYPER frequency channels S21 to S41.
On the Channel Set menu, the channels are
indicated as S1 to S44. For example, channel B is
indicated by Channel Set number S1, and channel
Q is indicated by Channel Set number S23 (see the
table below). If the CATV channel you want to
preset is indicated by its frequency (for example,
152.75 MHz), refer to the table below to find the
corresponding channel number.
Corre- Channel Receivable
sponding Set Frequency range
channel number (MHz)
B S1 116.75–124.75
C S2 124.75–132.75
D S3 132.75–140.75
D S4 140.75–148.75
E S5 148.75–156.75
81
,continued
83