Table of Contents
Advertisement
Tilt both plates upward 1.
Fold the lower plate outward 2.
Guide the tabs of the lower plate all the
way into the openings of the base
plate 3.
For information on where to place wheel
chocks when changing a wheel, see "Lift-
ing the vehicle" ( page 416).
Minispare wheel
The Minispare wheel is located in the
storage compartment underneath the
trunk floor.
Removing the Minispare wheel
Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
Loosen the retaining screw in the mid-
dle of storage well casing by turning it
counterclockwise ( page 394).
Remove the storage well casing
( page 394).
1 Vehicle tool kit
2 Arrow
3 Minispare wheel, Wheel bolts for
Minispare wheel
4 Vehicle tool kit storage well casing
Remove vehicle tool kit storage well
casing 4.
Remove Minispare wheel 3.
Storing the Minispare wheel
Place Minispare wheel 3 in wheel
well.
Place vehicle tool kit storage well
casing 4 over the Minispare wheel.
Practical hints
Where will I find...?
Make sure arrow 2 on vehicle tool kit
storage well casing 4 points in the
direction of travel.
Place storage well casing ( page 394)
over vehicle tool kit storage well
casing 4 and turn the retaining screw
( page 394) clockwise as far it will go
to secure the Minispare wheel.
i
Arrow 2 on vehicle tool kit storage well
casing 4 must point in the direction of travel.
Otherwise you cannot place the storage well cas-
ing ( page 394) on top and secure the Minis-
pare wheel with the retaining screw
( page 394).
Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
!
To prevent damage, always disengage trunk
floor handle from upper edge of trunk and lower
trunk floor before closing the trunk.
397
Advertisement
Table of Contents
