RX-8_8AT5-EA-09E_Edition1 Page250
Wednesday, April 15 2009 10:33 AM
Interior Comfort
Audio System
3. SR
(bank number)
(preset number)
(channel number)]
are displayed.
4. Three seconds later, it returns to normal
display. [SR
(bank number)
(e.g. channel name))]
NOTE
Six stations can be stored in each bank, SR1,
SR2, and SR3 for convenient access to your
favorite stations.
Preset channel call-up
Press and release the channel preset
button,
[SR
(bank number)
number)
(channel number)] appears.
When the preset button is pressed during
text mode, its channel number is
displayed first for three second and then
its text is displayed.
NOTE
In the initial setting, all channels are preset to
184.
Category change
Press the category button (UP or DOWN)
and select the desired category.
Press the category button (UP):
l
Category up
Press the category button (DOWN):
l
Category down
Every time the category (UP) button is
pressed for 1.5 second or less, the
category is changed over in the order
shown below.
At this time, the lowest (smallest-number)
channel within the category indicated is
received.
When the highest (or lowest) category is
reached, the category is changed over in
the order shown below.
6-36
Form No.8AT5-EA-09E
Highest category → All categories →
CH
Lowest category
NOTE
While all categories are selected, all channels
(text
covering a category can be accessed
(Category off condition).
Channel selection within a category
If you are in a selected category and the
channel number is displayed, turning the
manual tuning dial moves the channel
number up/down in that category.
l
l
CH
(preset
NOTE
The channel number needs to be indicated in
the display to use manual tuning dial for this
function.
Scan tuning
Press the scan button (
automatically sample stations. Scanning
stops at each station for about five
seconds. To hold a station, press the scan
button (
NOTE
l
l
Black plate (250,1)
Turn the manual tuning dial clockwise:
Channel Up
Turn the manual tuning dial
counterclockwise: Channel Down
) again during this interval.
Unsubscribed channels, invalid channels
and parental lock channels are not subject
to the scan, therefore these channels will
skip automatically.
You can scan all channels while all
categories are selected. If you are in a
selected category, you can only scan the
channels in that category.
) to
Need help?
Do you have a question about the 2010 RX-8 and is the answer not in the manual?