Turn And Lane-Change Signals - Mazda 2009 Mazda3 4-Door Owner's Manual

Driving Your Mazda
Switches and Controls
Without turbocharger
Front seat
Driver Passenger
×
× ×
× ×
× ×
×
×: Yes
: No
With turbocharger
Front seat
Driver Passenger
×
× ×
× ×
× ×
×
×: Yes
: No
qDaytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
5-54
Rear Switch
Load
seat Position
×
× ×
×
Rear Switch
Load
seat Position
×
× ×
×
Turn and Lane-Change
Signals
0 qTurn Signal
0
Move the signal lever down (for a left
1
turn) or up (for a right turn) to the stop
2
position. The signal will self-cancel after
3
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
0
0
Right lane
1
change
1
OFF
2
Left lane
change
Left turn
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes
will return to the off position when
released.
NOTE
If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.
Right turn
until the
and hold it there. It