Mazda3_8T66-EA-04H_Edition1 Page112
Thursday, June 24 2004 5:18 PM
Driving Your Mazda
Starting and Driving
Ignition Switch
qIgnition Switch Positions
LOCK
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
Manual transaxle
To turn the key from the ACC to the
LOCK position, push the button when the
key is at the ACC position, then turn the
key to the LOCK position.
Button
5-2
Form No.8T66-EA-04H
Automatic transaxle
To turn the key from the ACC to the
LOCK position, the shift lever must be in
the P position.
Removing the Key:
It's dangerous to remove the key from
the ignition switch while the vehicle is
moving. Removing the key allows the
steering wheel to lock. You will lose
steering control and a serious accident
could occur.
Remove the key only when the vehicle
is parked.
Not Setting the Parking Brake:
Leaving the driver's seat without
setting the parking brake is
dangerous. Unexpected vehicle
movement could occur if the parking
Push the
brake is not set. This could cause an
button
accident. Before leaving the driver's
seat, always set the parking brake and
make sure the shift lever is in P with
an automatic transaxle or in 1 or R
with a manual transaxle.
Black plate (112,1)
Shift lever
engaged in P
(park)
WARNING