Table of Contents
Advertisement
Quick Links
USERʼS MANUAL
Model No. PETL71709.0
Serial No.
Write the serial number in the space
above for future reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if there
are missing parts, please contact
us:
Call: 08457 089 009
From Ireland: 053 92 36102
E-mail: www.iconsupport.eu
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC, Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
In Australia:
Please contact the store where
you purchased this product.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
www.iconeurope.com
for future reference.
Advertisement
Table of Contents
Related Manuals for Pro-Form 1095 ZLT PETL71709.0
Summary of Contents for Pro-Form 1095 ZLT PETL71709.0
- Page 1 USERʼS MANUAL Model No. PETL71709.0 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, please contact Call: 08457 089 009 From Ireland: 053 92 36102 E-mail: www.iconsupport.eu Write: ICON Health &...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 20. Do not attempt to raise, lower, or move the treadmill, and before performing the mainte- treadmill until it is properly assembled. (See nance and adjustment procedures described in ASSEMBLY on page 6, and HOW TO FOLD this manual. Never remove the motor hood un- AND MOVE THE TREADMILL on page 17.) less instructed to do so by an authorized ser- You must be able to safely lift 45 lbs.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM ing this manual, please see the front cover of this man- ® 1095 ZLT treadmill. The 1095 ZLT treadmill offers an ual. To help us assist you, note the product model impressive array of features designed to make your number and serial number before contacting us. -
Page 6: Assembly
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. - Page 7 2. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Hole Remove and discard the two indicated bolts (A) and the shipping bracket (B).
- Page 8 5. Hold a Bolt Spacer (3) inside the lower end of the Right Upright (72). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (3), 3/8" x 4" Bolt (6), and 3/8"...
- Page 9 8. Have a second person hold the console assem- bly near the Right Upright (72). Connect the Upright Wire (78) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again.
- Page 10 11. Identify the Storage Latch (55). Remove the tie from the end of the tube. Make sure that the sleeve has been slid over hole 1 and that the Latch Knob (54) is locked into hole 1. Pull on the sleeve to make sure that it is locked into place.
-
Page 11: Operation And Adjustment
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed. - Page 12 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 13. To use the man- ual mode, see page 13. To use a preset workout, see page 15. To use the information mode, see The treadmill console offers an impressive array of features designed to make your workouts more effec- page 16.
- Page 13 HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to To start the walking belt, press the Start button, the cold temperatures, allow it to warm to room tem- Go button, the Speed increase button, or one of perature before turning on the power.
- Page 14 Time display—When time, the console will not display your heart rate accurately. For information on the optional the manual mode is se- lected, this display will chest pulse sensor, see page 16. show the elapsed time. When a workout is se- Before using the lected, the display will handgrip pulse...
- Page 15 HOW TO USE A PRESET WORKOUT the speed setting for the current segment. At the end of each segment, a series of tones will sound 1. Insert the key into the console. and the next segment of the profile will begin to flash.
- Page 16 THE INFORMATION MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that keeps An optional chest pulse sensor offers hands-free oper- track of the total distance that the walking belt has ation as it tracks your heart rate during your workouts. To purchase the optional chest pulse sensor, call moved and the total number of hours that the treadmill the telephone number on the front cover of this...
-
Page 17: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. - Page 18 HOW TO LOWER THE TREADMILL FOR USE Frame 1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. It may be nec- essary to push the frame forward as you pull the knob to the left.
-
Page 19: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call the telephone number listed on the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 20 Remove the three 3/4" Screws (10) and carefully pivot the Motor Hood (57) off. Locate the Reed Switch (64) and the Magnet (42) on the left side of the Pulley (43). Turn the Pulley until the Magnet is aligned with the Reed Switch. 1/8 in.
- Page 21 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn;...
-
Page 22: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 23: Part List
PART LIST—Model No. PETL71709.0 R0110A Key No. Qty. Description Key No. Qty. Description 1/2" Screw Drive Motor Isolator 3/4" Tek Screw Drive Motor Bolt Spacer Lift Frame 3/8" x 2" Bolt Drive Motor Bushings 5/16" x 1" Bolt Rear Roller Ground Wire 3/8"... -
Page 24: Exploded Drawing
EXPLODED DRAWING A—Model No. PETL71709.0 R0110A... - Page 25 EXPLODED DRAWING B—Model No. PETL71709.0 R0110A...
- Page 26 EXPLODED DRAWING C—Model No. PETL71709.0 R0110A...
- Page 27 EXPLODED DRAWING D—Model No. PETL71709.0 R0110A...
-
Page 28: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to pro- vide the following information when contacting us: • the model number and the serial number of the product (see the front cover of this manual) •...