Do you have a question about the 720D and is the answer not in the manual?
Questions and answers
mrs betty chamberlain
April 21, 2025
how to change the bulb on silver 470d overlock m/c
2 comments:
mrs betty chamberlain
April 21, 2025
@mrs betty chamberlain
Mr. Anderson
May 10, 2025
To change the bulb on a Silver 470D overlock machine, follow these steps:
1. Turn off and unplug the machine to ensure safety. 2. Locate the bulb cover: Usually, it's behind or near the needle area. You may need to remove a screw or slide off the cover. 3. Remove the old bulb: Gently pull or unscrew the bulb, depending on the type (check if it's a push-in or screw-in type). 4. Install the new bulb: Insert the new bulb of the same type and wattage. Make sure it is securely in place. 5. Replace the cover and secure it if needed. 6. Plug in and turn on the machine to test the new bulb.
Use only the recommended bulb type for the Silver 470D to avoid damage.
Need help?
Do you have a question about the 720D and is the answer not in the manual?
Questions and answers
how to change the bulb on silver 470d overlock m/c
@mrs betty chamberlain
To change the bulb on a Silver 470D overlock machine, follow these steps:
1. Turn off and unplug the machine to ensure safety.
2. Locate the bulb cover: Usually, it's behind or near the needle area. You may need to remove a screw or slide off the cover.
3. Remove the old bulb: Gently pull or unscrew the bulb, depending on the type (check if it's a push-in or screw-in type).
4. Install the new bulb: Insert the new bulb of the same type and wattage. Make sure it is securely in place.
5. Replace the cover and secure it if needed.
6. Plug in and turn on the machine to test the new bulb.
Use only the recommended bulb type for the Silver 470D to avoid damage.
This answer is automatically generated