Parrot CK3100 Series Installation Manual page 4

SANDERO
1
Insert the removal tools into the
slots on each side of the radio.
3
Using the plastic trim removal
tools, unclip the car stereo and
air conditioning surround
starting at the bottom and
moving towards the top.
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
Disassembly
antenna. Then remove the radio.
Remove the passenger side door
Unclip the radio, pull it out and
unplug the connectors and the
seal.
2
4