Parrot CK3100 Series Installation Manual page 4

C-MAX 2011
1
3
5
3
7
5
This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without
the authorisation of Parrot SA. Pictures for information only.
Remove the
rubber panel
located on top of
the dashboard
and in front of
the central
screen
ATTENTION: the
shell is in 2 parts.
Properly position
the trim tools
under the clips
as shown in the
photo
Remove screws 3
and 4 above the
4
centre screen
Unscrew the 5
screws under the
centre screen
Disassembly 1 / 2
Remove the shell
using the plastic
trim tools
Remove screws 1
and 2
Lift and
disconnect the
centre screen
Unscrew screws 6
and 7 located
above the radio.
Remove the façade,
pulling downwards,
and unplug the
connector
2
4
1 2
6
8
6
7