NETGEAR Powerline 500 XWNB5221 Quick Start Manual page 6

Wireless LED
Factory Reset
button
Ethernet port
On/Off switch
Security button
Warning: Do not press the Security button on the Powerline adapter until
installation is complete and the adapters are communicating with each other
(indicated by the blinking Pick A Plug LED). Pressing this button too soon can
temporarily disable Powerline communication. If this occurs, use the Factory
Reset button to return the Powerline adapter to its factory default settings.
Solid. The Powerline wireless access point is securely paired
with the wireless network client.
Blinking. The Powerline wireless access point is pairing with
the wireless network client.
Press the Factory Reset button for one second, then release
it to return the Powerline adapter to its factory default
settings.
Connect your computers, networking equipment, and other
equipment that uses an Ethernet cable to your Powerline
network.
Slide to turn the adapter off or on.
Use the Security button to create a secure Powerline
network. On your WiFi access point, use the Security button
both to create a secure Powerline network and to let your
wireless clients join the wireless network.
6