Types Of Installation - Jet TG-400 Operator's Manual

Your new model Spray Gun is normally used for touch-ilp,
stenciling and small work spraying. Like any other fine
precision instrument, its most efficient operation depends
on a knowledge of its construction, operation, and main-
tenance. Properly handled and cared for, it will produce
beautiful, uniform finishing results long after other spray
guns have worn out.
TYPESOF INSTALLATION
)
.
1~~ _A"',,',,
d:f~~
l
f1"",, ~ .
l_j SiphonCup
SIPHON
FEED CUP HOOKUP
Ot! and W.,'
E.tractor
Oil and Water
E .tractor
Air
Prl'ssure Cup
PRESSURE FEED CUP HOOKUP
Air pressure for atomization is regulated at extractor;
fluid pressure at cup regulator. For heavy fluids and
internal mix nozzle spraying. fluid adjusted by control
screw on gun'-
Pressure cup also available less regulator.
FluId
PRESSURE FEED TANK HOOKUP
(Single regula tor)
Air pressure for atomization is regulated at extractor.
fluid pressure at tank regulator.
A.. Sor>r>ly
Pr.ssure Tank
FluId
PRESSURE FEED TANK HOOKUP
(Double regulator)
Air pressure for atomization and fluid supply is
by two individual air regulators on tank
rcgulatcJ
~~
nr;~r.
Fluid
FluId'
PRESSURE FEED CIRCULATING HOOKUP
Air pressure atomization regulated at extractor. Fluid
pressure regulated at fluid regulator.