GE DDE9500M Use And Care Manual page 12

The ~oblem Solver
PROBLEM
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
If you need more help.. call, toll free:
GE Aswer Center"
consumer information service
(continued)
POSSIBLE CAUSE AND REMEDY
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
Failure to use fabric softener. Proper use of fabric sofiener will minimize wrin~ing.
To remove wrin~es:
If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately.
Iron carefully.
Send to dry cleaners for pressing.
Some wrinMes may remain which cannot be removed?
good
out wrirdded, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
laundry procedures and Permanent Press clothes still come