Operation & Installation; Bluetooth - Oner CT03-BT User Manual

3
Operation & Installation

Bluetooth

Installation-Relay
Installation-Acc Detecting
Installation-Car Door Detecting
Installation-Lock/unlock Car Door
Installation-Fuel Monitoring(option)
Bluetooth
Bluetooth with APP is very easy to use, please do as follows:
1) Connection
Insert bluetooth receiver to USB port of tracker, connection complete.
2) Operation
Run bluetooth APP, it will connect bluetooth automatically (for the first time, you need to scan and
connect bluetooth by manual), it can detect and show the status of the car (arm/disarm), and then
you can start to operate
A. SOS ：Press this button, alert message will be sent
out, it can be used in emergency (i.e.:robbery, car broke
down but no other ways to ask for help).
B. Arm/Disarm： Press this button to switch arm/disarm
mode. In arm mode, alerts active automatically：
Shaking alert: car get hits by other cars while parking
on the road, alert active and send out alert notification.
Open card door alert: car door is opened illegally, it will
warn the car owner.
Engine on alert: some one starts the car illegally, car owner
can get warning and handle it at once
Click the same button again to switch to disarm mode,
and above alerts will be deactived automatically.
C. lock/unlock: press button to lock or unlock the car
door.
D. Configuration
To set info of bluetooth (bluetooth name, plat No., SIM
card number), support setting info of all bluetooth devices,
it is easy to manage.
ONER Bluetooth GPS Vehicle Tracker
User Manual
Operation & Installation
5