Gigabyte GA-8IEX Series Technical Reference page 10

Select your boot device priority by USB-ZIP.
8USB-ZIP
Select your boot device priority by USB-FDD.
8USB-FDD
Select your boot device priority by USB-HDD.
8USB-HDD
Select your boot device priority by ZIP.
8ZIP
Disabled this function.
8Disabled
FBoot Up Floppy Seek
MDuring POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
8Enabled
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are
all 80tracks.
BIOS will not search for the type of floppy disk drive by track number. Note
8Disabled
that there will not be any warning message if the drive installed is 360 K.
(Default value)
FDRAM Data Integrity Mode
MThis feature allows you to set the DRAM data Integrity Mode
Set the DRAM data Integrity Mode is Non-ECC (Default)
8Non-ECC
Set the DRAM data Integrity Mode is ECC.
8ECC
FInit Display First
This feature allows you to select the first initation of the monitor display from which card, when
M
you install an AGP VGA card and a PCI VGA card on board.
Set Init Display First to PCI Slot.
8PCI
Set Init Display First to AGP. (Default value)
8AGP
GA-8IEX Series Motherboard - 10 -