Power Management Setup - Acer AX1400 Service Manual

Power Management Setup

Field
ACPI Suspend Mode
Deep Power Off Mode
Power On by RTC Alarm
Power On by PCIE Devices
Power On by PCI Devices
Power On by Modem Ring
Power On by Onboard LAN
Wake Up by PS/2 KB/
Mouse
Aspire AX1400 Service Guide
Description
Use this item to define how your system suspends. Default value is
S3 (STR), the suspend mode is suspend to RAM, i.e., the system
shuts down with the exception of a refresh current to the system
memory.
Enables or disables compliance to the Energy-using Products Lot 6
Directives (EuP Lot 6).
Enables or disables the system to wake up from a power-saving
mode when an RTC alarm occurs.
Enables or disables the system to wake up from a power-saving
mode when an event occurs on an installed PCI Express device.
Enables or disables the system to wake up from a power-saving
mode when an event occurs on an installed PCI device.
Enables or disables the system to wake up from a power-saving
mode when a modem signal is received. network message
Enables or disables the system to wake up from a power-saving
mode when the onboard LAN controller received a network
message.
Enables or disables the system to wake up from a power-saving
mode when a PS/2 keyboard or mouse is used.
Value
S3 (STR)
S1 (POS)
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
15