Brother MFC-9125CN Quick Setup Manual page 22

Wired Network
g
Choose Wired Network Connection, and
then click Next.
Note
If you want to install the PS driver (Brother's
BR-Script Driver), choose Custom Install and
then follow the on-screen instructions. When the
Select Features screen appears, check
PS Printer Driver, and then continue following
the on-screen instructions.
h
When the this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows
the User's Guide for your software for
information on how to add the following
network ports.
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network

connection, add UDP port 137.
i
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
22
• You can find your machine's IP address and
• If your machine is not found over the network,
• If the IP Address of the machine is not yet
j
®
Firewall, see
Windows
Note
the node name by printing out the Network
Configuration List. See Print the Network
Configuration List on page 27.
the following screen will appear.
Confirm your network settings by following the
on-screen instructions.
configured for use on your network, the
following screen appears.
Click OK and then Configure IP Address.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
If you do not want to monitor the machine
status and error notification from your
computer, uncheck Enable Status Monitor
and then click Next.
®